How To Install Stone Patio
If you want to know "how to install stone patio", you need to make sure you have all of the tools, supplies, and muscles.
Below are a few pictures of the job that we did to shoot our DVD
Hans's "How-To Lay Flagstone."
If you want to read step-by-step instructions on "how to lay stone patio" in sand or concrete, then
go here!
Below is a picture of the tools we used to get the job done.

It might look like a lot of tools, but you can save yourself thousands of dollars by doing it yourself.
If you lay the stone in sand, you will need fewer tools than are displayed here.
Just remember, we charge about $15 to $25 per square foot. That does include the stone, but by doing it yourself you could do it for about $5 a square foot. Of course that depends on the stone that you use.

The picture above is the job half-way done and laid dry.
You then need to lay the stone in cement, unless you're doing it in sand, and tuck it in.

When you're all done, your job could look like this!

We don't want to make it sound like it is an easy job. If you take your time, you can do a great looking patio that you'll be pleased with.
|
Subscribe FREE
to our E-ZINE full of tips, ideas, art, exterior-design, interviews
from architects and everything to enhance the beauty of the flagstone
around your house and life.
Learn and Read About:
- Keeping your flagstone looking
beautiful
- Ideas from designers on what
looks good with flagstone
- Pictures and tips from jobs that we do
- Sales from Stone Yards
- And Much, Much More
|
|